Barcoding - Do it right!/GS1


This page uses official GS1 information to look at some common barcoding problems that can be caused by poor machinery or inadequate maintenance.

Codeology are Accredited GS1 Solution Providers, so if you think you suffer from any of these problems then contact us for help and advice on how to cure them.

 

An incorrect adjustment for a certain ink spread. The printed bars are out of specification, being either too narrow or too wide.

 

 

 

 

Labels are placed too close to the corner of the box, so the barcodes are too close to the edge.

 

 

 

 

Faulty printheads cause missing bars or white horizontal lines across the barcode.